- Do not let water or any other liquid get into the air vents
to avoid damage to the inner parts of the appliance.
- Never submerge the appliance in water or any other li-
quid or place it under running water.
- If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance’s useful life and could become unsafe
to use.
- Then dry all parts before its assembly and storage.
Anomalies and repair
Take the appliance to an authorized technical support
service if product is damaged or other problems arise.
Do not attempt to disassemble or repair the appliance
yourself as this may be dangerous.
Features:
Puissance : 90 W
Voltage : 220-240 V
Fréquence : 50 Hz
Brumisation : 280 ml/h
Capacité du réservoir d’eau : 3,1 l
Classe II
Problem Cause Solution
No rotation power on - Motor no working
- Too low voltage
- Motor shaft gets stuck
- Circuit board broken
- Contact the after sales service
Apparent vibration - Rear guard loosens
- Blade broken or imbalance
- Lock the protection guard
- Replace the blade
Mist function not working - Water tank is empty
- Water tank is broken
- Rell the water tank
- Replace the water tank
Indicator light off once the
appliance on
- Appliance is off - switch on the appliance
- if still not working, contact the after sales service
Mist with odors - Odors will disappear after use for a
period of time
- The water tank interior part is dirty
- Open the water tank cap in a cool ventilated place
- Change the water in water tank
- Take the appliance to an authorised technical support service if product is damaged or other problems arise. Do not
attempt to disassemble or repair the appliance yourself as this may be dangerous.
Notice vb 02-New.indb 11 29/04/2016 09:21
To Next Page
Loading...
Need help?
General
