Taurus ALPATEC MF4000 User Manual

ANTI-MOSQUITO FUNCTION:
- On the back of the body there is a groove
where the anti-mosquito pill should be placed
(not included).
- Press the anti-mosquito button (VIII).
- To deactivate this function, follow the proce-
dure for switching it on in reverse.
AROMATIC FUNCTION:
- The tray for the aromatic function is located on
the front of the front grille.
- To activate this function press button (d, IV).
- To deactivate this function, follow the
proce-
dure for switching it on in reverse.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance using the OFF button.
- Unplug the appliance from the mains.
- Clean the appliance.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
fe
w drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
i
nexorably affect the duration of the appliance’s
useful life and could become unsafe to use.
- Position the wheel supports in the holes’ base.
and last elements of the radiator.
- Position the base with the body and
it with
the base nut (M).
- Stand the appliance up again so as to check
that the wheels work properly.
ASSEMBLING THE GRILL AND THE
PROPELLER:
- Fit the rear grill (G) on the motor housing (I),
matching their
points.
- Tight the grill nut (F) that attaches the grill,
Make sure of a correct setting.
- Fit the propeller (D) On the motor shaft.
- Tight the nut (C) that attaches the propeller,
Make sure of a correct setting.
- Fit the front grill (B) front the rear grill, matching
the security screw position. Fix the front grill
turning around its
belt (E) and tight the
security screw by using a screwdriver.
- Check the correct rotation of the propeller.
INSTRUCTIONS FOR USE
USE:
- Extend the cable completely before plugging
it in.
- Connect the appliance to the mains.
- Turn the appliance on, by using the speed
selector button (f, VI).
- Select the desired speed.
- Select the desired
mode.
TIMER FUNCTION:
- To program the operating time simply select it
using the (c, III) button.
- The time programmed or remaining time will
appear on the display.
- After the selected time the appliance will switch
off automatically.
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the
from the apparatus so that it
automatically alternates over a range of 75º.
- To activate this function, press the (d, IV)
button.
- To deactivate this function, follow the proce-
dure for switching it on in reverse.

Taurus ALPATEC MF4000 Specifications

General

Brand	Taurus
Model	ALPATEC MF4000
Category	Fan
Language	English