the lower part of the appliance (Fig.3).
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
EMPTYING THE DUST BOX
- Empty the dust container after each use of the
vacuum cleaner.
- Disconnect the hose from the vacuum cleaners
air intake. (Fig.2)
- Disconnect the dust box from the appliance
(Fig.4).
- Open the lid of the dust box and empty the
contents into the appropriate waste disposal
receptacle. (Fig.5).
- Check the condition of the motor lter.
- Close the lid of the dust box.
- Attach the dust box to the appliance.
- Connect the hose to the vacuum cleaners air
intake. (Fig.1)
- Changing the lters:
- - Motor lter, it is advisable to periodically check
the state of the lter, which should be cleaned/
replaced after every 50 hours of use.
- - HEPA type air outlet lter (high efciency air
lter which effectively removes spores, ash,
dust mites, pollen ...), it is advisable to
periodically check the condition of the lter, it
should be cleaned/replaced after every 50 hours
of use, or if a signicant drop in suction power is
noticed
TO REMOVE THE FILTERS:
- Motor lter:
- Disconnect the dust tank from the appliance.
(Fig. 4)
- Open the cover (R) that contains the lter and
extract the lter (Q1). (Fig. 6)
- Remove the HEPA lter (Q2) from its housing by
rotate it as the arrowhead show. (Fig. 7)
- Rinse the HEPA lter in the lukewarm water and
dry it during 24h.
- To reassemble the lter, proceed with the above
instructions, in reverse order.
- Outlet lter:
- Rotate the grill outlet lter as the arrowhead
show. (Fig. 8)
- Remove the lter (P) from its housing. (Fig. 8)
- To reassemble the lter, proceed with the above
instructions, in reverse order.
- Supplies
- Supplies can be acquired from distributors and
authorised establishments (such as lters, etc...)
for your appliance model.
- Always use original supplies, designed
specically for your appliance model.
- These supplies are available in specialist shops.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
- For EU product versions and/or in case that it is
requested in your country:
- Ecology and recyclability of the product
- The materials of which the packaging of this
appliance consists are included in a collection,
classication and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended; take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
- The following information is regarding to energy
labelling and ecodesign:
- Product che
Trade mark: TAURUS
Model: - Exeo Compact
Efciency class A