Taurus IS 5000 M - Page 34


dŚĞƐƚĞƉƐƚŽĂƐƐĞŵďůĞƚŚĞĐŽŶŶĞĐƚŽƌƐĂƌĞůŝƐƚĞĚĂƐĨŽůůŽǁƐ
ĂͿ^ƚƌŝƉŽīƚŚĞǁŝƌĞĂďŽƵƚϳŵŵĚŝƐĂƐƐĞŵďůĞƚŚĞĐŽŶŶĞĐƚŽƌĐĂƉŶƵƚ;ƐĞĞƉŝĐƚƵƌĞϱϯͿ
b) Crimping metal terminals with crimping pliers as shown in picture 5.4.
c) Insert the contact pin to the top part of the connector and screw up the cap nut to the top
part of the connector. (as shown in picture 5.5).
WŝĐϱϯŝƐĂƐƐĞŵďůĞƚŚĞĐŽŶŶĞĐƚŽƌĐĂƉŶƵƚ


Pic 5.4 Crimp the contact pin to the wire
Pic 5.5 connector with cap nut screwed on