Taurus Mixing Chef User Manual

Use and care:
- Fully unroll the appliance’s power
cable before each use.
- Do not use the appliance if its ac-
cessories are not properly fitted.
- Do not use the appliance if the ac-
cessories attached to it are defective.
Replace them immediately.
- Do not use the appliance if the on/
off switch does not work.
- Do not move the appliance while
in use.
- Do not overload the appliance’s
weight capacity.
- Do not apply any additional pressu-
re on the appliance while it is in use.
- Do not force the appliance’s work
capacity.
- Unplug the appliance from the
mains when not in use and before
undertaking any cleaning task.
- This appliance is for household use
only, not professional, industrial use.
- This appliance is intended for adult
use. Ensure that this product is not
used by the disabled, children or
people unused to its handling.
- This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
- This appliance should be stored
out of reach of children and/or the
disabled.
- Never leave the appliance unatten-
ded while in use.
- Never rest the appliance into a
surface while in use.
- Do not use the appliance for more
than 3 continuous programmes.
Leave it standing to cool for 3 to 5
minutes before reuse.
- Pay special attention during the
assembly and disassembly of blades,
as they are sharp and could cause
harm.
Service:
- Any misuse or failure to follow
the instructions for use renders the
guarantee and the manufacturer’s
liability null and void.
Instructions for use
Before use:
- Remove the appliance’s protective
film.
- Ensure that the selected tension on
the voltage selector coincides with
the tension of the mains.
- Before using this product for the
first time, it is advisable to test it
without food.
- Before using the product for the
first time, clean the parts that will
come into contact with food in the
manner described in the cleaning
section.
Use:
- Unroll the cable completely before
plugging it in.
- Connect the appliance to the mains.
- Press down security lever (I) to lift
machine arm (Fig.1)
- Fix antisplash lid (B) on machine’s
arm, trun anticlockwise and check it
is well fixed.
- Fix bowl (C) on to the base and, lock
it as arrowhead denotes. (Fig.2)
- Fix beater (J), mixer (K) or dough
hook (L) as desired in locking switch
and trun anticlockwise until it stays
well fixed (Fig.3)
- Press down security lever (I) while
pushing down machine’s arm until
security lever (I) returuns to initial

Taurus Mixing Chef Specifications

General

Brand	Taurus
Model	Mixing Chef
Category	Mixer
Language	English