EasyManua.ls Logo

Taurus MO20IXD - Page 8

Taurus MO20IXD
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Instructions
Please Read the Manual Carefully Before
Installation
The microwave includes 3 accessories that
must be fixed before installation:
A - Footpad block
B - Rubber mat
C - Bracket
Follow the instructions below for the
assembly.
Accessories for installation:
1. Adjusting screw A
2. Screw B
3. Trim-kit plastic cover
Electrical connection
The oven is fitted with a plug and must be only
connected to a properly installed earthed socket.
In accordance with the appropriate regulations,
the socket must only be installed and the
connecting cable must only be replaced by a
qualified electrician.
If the plug is no longer accessible following
installation and all-pole isolating switch must be
present on the installation side with a contact
gap of at least 3mm.
Built-in furniture
- The built-in cabinet shall not have a rear wall
behind the appliance. Minimum installation
height is 85cm.
- Do not cover ventilation slots and air intake
points.
1.

Related product manuals