Need help?Do you have a question about the Taurus PTCP-2200 and is the answer not in the manual?
Read instructions carefully before switching on and keep for future reference.
Fill the deposit with water, respecting the MAX level and ensuring correct tank placement.
Connect, set controls, and wait for the pilot light to indicate adequate temperature.
Set steam and temperature control to MIN position for dry ironing.
Iron with steam when the water deposit is filled and temperature is adequate.
Iron hanging items by selecting maximum temperature and using steam control.
Select MIN setting, unplug, remove water, and clean the appliance.
Clean with a damp cloth and mild detergent; do not use solvents or submerge.
Follow steps to flush the system and clean the soleplate with a damp cloth.
To Next Page
General