Taurus SELENE COMPACT - Maintenance and Descaling; Cleaning Instructions; Limescale Removal

for approximately 15 minutes before reconnecting. If the
machine does not start again seek authorised technical
assistance.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the electrical equipment and the mains connection
with a damp cloth and dry.
• DO NOT IMMERSE IN WATER OR ANY OTHER LIQUID.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry it.
• Do not use solvents or products with an acid or base pH,
such as bleach, or abrasive products, for cleaning the
appliance.
• Neither parts of this appliance are suitable for cleaning in
the dishwasher.
• Then dry all parts before their assembly and storage.
HOW TO DEAL WITH LIMESCALE INCRUSTATIONS
• For the appliance to work correctly, it should be kept free
of limescale or magnesium incrustations caused by the
use of hard water.
• To prevent this kind of problem, we recommend the use of
water with low lime or magnesium mineralisation.
• However, if it is not possible to use the kind of water
recommended above, you should periodically remove the
limescale from the appliance:
- Every 6 weeks if the water is “very hard”.
- Every 12 weeks if the water is “hard”.
• A specic anti-limescale product should be used on this
kind of product.
• Homemade solutions are not recommended in the
descaling of this appliance, such as the use of vinegar.