Taurus Striker Mini - Troubleshooting and Disposal; Troubleshooting Common Issues

Anomalies and repair
PROBLEM PROBABLE CAUSE SOLUTION
1 The low battery indi-
cator lamp is lit.
1. The battery is low.
2. The appliance has
been lifted from the
floor.
1. Recharge the
battery.
2 The appliance has not
started.
1. The on/off button is
in the “0” position.
2. The dust box filter
is badly fitted.
1. Operate the robot’s
on/off button.
2. Fit the dust box
filter correctly.
3 The battery charged
indicator continues to
pulse after 48 hours
of charging.
During the charging
process, the current
has been cut off, so
the appliance has
not been charged
properly.
Repeat the charging
process.
4 The side brushes are
deformed.
They are deformed
due to use.
Remove the side brus-
hes and soak them in
hot water to recover
their initial shape.
5 The appliance does
not start functioning.
1. The battery is
incorrectly fitted.
2. The battery charge
level is too low.
1. Fit the battery
correctly.
2. Charge the batte-
ries of the appliance.
6 The appliance goes in
circles and never in a
straight line.
There may be
problems with the
wheels.
Contact our customer
service department to
repair them.
7 The autonomy is lower
than normal.
The battery has not
completely recovered /
charged.
1. Repeat the char-
ging process.
2. This can be normal
during the first times
of use.
3. Change the battery
for a new one.
Manual striker mini.indb 24
18/03/11 18:00