- Turn the appliance on, by using the on/off
button.(G)
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off using the on/off button.
(G)
- Unplug the appliance from the mains.
- Retract the cable by pressing the roller cable
button and guide the cable into the appliance.
(F)
- The cable housing means you can remove and
have available the required length of cable for
working with the appliance, preventing accident
risk situations.
- Clean the appliance.
CARRY HANDLE/S:
- This appliance has a handle on the upper
part of the body, which facilitates comfortable
transportation(H).
PARKING POSITION:
- This appliance has its own parking position for
comfortable and straightforward storage.
- To make use of the horizontal parking hook the
head’s hook onto the hook that is to be found
onthelowerpartoftheappliance.(Fig.2).
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
EMPTYING THE DUST BOX
- Empty the dust container after each use of the
vacuum cleaner.
- Disconnect the hose from the vacuum cleaner
airintake.(Fig.1).
- Disconnect the dust box from the appliance.
(Fig.3).
- Open the lid of the dust box and empty the
contents into the appropriate waste disposal
receptacle.(Fig.4).
- Checktheconditionofthemotorlter.
- Close the lid of the dust box.
- Attach the dust box to the appliance.
- Connect the hose to the vacuum cleaners air
intake.(Fig.1).
CHANGING THE FILTERS:
- Motorlter,itisadvisabletoperiodicallycheck
thestateofthelter,whichshouldbecleaned/
replaced after every 50 hours of use.
- HEPAtypeairoutletlter(highefciencyair
lterwhicheffectivelyremovesspores,ash,
dustmites,pollen...),itisadvisabletoperiod-
icallychecktheconditionofthelter,itshould
be cleaned/replaced after every 50 hours of
use,orifasignicantdropinsuctionpoweris
noticed
TO REMOVE THE FILTERS:
MOTOR FILTER:
- Disconnect the dust tank from the appliance.
(Fig.3).
- RemovetheHEPAlter(Q2)fromitshousing
byrotateitasthearrowheadshow.(Fig.5).
- RinsetheHEPAlterinthelukewarmwater
anddryitduring24h.
- Toreassemblethelter,proceedwiththe
above instructions, in reverse order.
OUTLET FILTER:
- Rotatethegrilloutletlterasthearrowhead
show.(Fig.6).
- Removethelter(P)fromitshousing.(Fig.7).
- Toreassemblethelter,proceedwiththe
above instructions, in reverse order.
SUPPLIES
- Supplies can be acquired from distributors
andauthorisedestablishments(suchaslters,
etc...)foryourappliancemodel.
- Alwaysuseoriginalsupplies,designedspeci-
cally for your appliance model.
- These supplies are available in specialist
shops.