TAVRIDA ELECTRIC Rec15/25 Al1 5p User Manual

136 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Table of Contents

Questions and Answers:

C
Courtney MillerAug 18, 2025
What to do if my TAVRIDA ELECTRIC Rec15/25 Al1 5p CPM malfunctions?
- D
  Diana WilliamsonAug 18, 2025
  If the CPM (Control and Protection Module) malfunctions, several factors could be at play. Start by checking if the screen has low or no contrast, although this might not indicate a malfunction. Ensure that the CPM mode is enabled via PCI. Verify the connection of plugs '1' and '19' between the CPM and RCM (Remote Control Module). If issues persist, the wiring connecting the RCM and CPM might be faulty, or either the RCM or CPM could be malfunctioning, requiring replacement.
M
Michael ContrerasAug 20, 2025
Why am I getting an RTU Short Circuit error on my TAVRIDA ELECTRIC Rec15/25 Al1 5p Industrial Equipment?
- S
  Sharon SalazarAug 21, 2025
  An RTU (Remote Terminal Unit) short circuit error in your TAVRIDA ELECTRIC Industrial Equipment can stem from a few potential issues. The first thing to check is for an internal short circuit within the RTU itself, which would necessitate replacing the RTU. Another potential cause is a short circuit in the wiring that connects the RTU and RCM (Remote Control Module); replacing this wiring may resolve the issue. Finally, the RCM could be malfunctioning, which would also require replacement.

TAVRIDA ELECTRIC Rec15/25 Al1 5p Specifications

General

Brand	TAVRIDA ELECTRIC
Model	Rec15/25 Al1 5p
Category	Industrial Equipment
Language	English

Summary

Safety First

Safety Instructions

General hazard statements applicable to the equipment are described.

Abbreviations

Product Description

Product Application Field

Describes where the reclosers can be applied in overhead distribution lines and substations.

Product Main Components

Details the main components of the recloser, including OSM and control cubicle.

Technical Parameters

Lists electrical and mechanical specifications of the recloser.

Nameplates and Seals

Nameplates

Information on OSM and RC nameplates, including technical and serial numbers.

Seals

Details the placement and purpose of seals on components.

Product Handling

Transportation

Safe handling procedures during transit to prevent damage.

Storage

Guidelines for storing the equipment in dry areas with natural ventilation.

Handling Requirements

General recommendations for safe handling of components to avoid damage.

Installation

Required Equipment

List of tools and materials needed for installation.

Installation Procedure

Step-by-step guide for installing the OSM and RC5_4.

Commissioning

No-load Tests

Procedures for initial tests before powering up the main line.

On-load Tests

Tests performed after closing the main contacts.

Operation

Switching

Details on performing mechanical and MMI-controlled switching operations.

Logging

Accessing and interpreting event and malfunction logs via MMI.

Settings Modifications

How to modify protection and communication settings locally or remotely.

Maintenance and Troubleshooting

Maintenance

Information on the device's maintenance-free operation.

Troubleshooting

Diagnosing and resolving common issues with the recloser.

Component Replacement Procedures

Steps for replacing internal components like RCM, CPM, PSFM, and battery.

Disposal

Appendices

OSM Drawings

Technical drawings with dimensions of the Outdoor Switching Module.

RC5_4 Drawings

Technical drawings with dimensions of the RC5_4.

Mounting Kits Drawings

Diagrams illustrating various mounting kits for the recloser.

Spare Parts and Accessories

List of available spare parts and accessories for ordering.

List of changes