Taylor 110CE User Manual

The stringing process is the same
for 12-string guitars, except that you
should trim the bass strings the equiv-
alent of two tuners’ lengths past the
post into which it’s inserted and three
tuner lengths for the trebles. Is it worth
the trouble? You bet it is. Double your
pleasure — double your fun!
1. Taylor 30th Anniversary guitars feature a vintage slot-head
design, similar to that on a nylon-string guitar. When re-stringing,
trim the bass strings two tuners’ lengths past the post for trebles and
three tuners’ lengths for the trebles.
2. Position the tuner hole as shown and insert the string.
3. Here’s the big difference: one wrap goes on the inside, the rest of
the wraps go on the outside of the string end, toward the tuners.
4. A well-strung slot-head guitar.
Slot-Head
12-String

Taylor 110CE Specifications

General

Body Shape	Dreadnought
Top Wood	Sitka Spruce
Back and Sides Wood	Layered Walnut
Neck Wood	Tropical Mahogany
Fingerboard Wood	Ebony
Scale Length	25.5 inches
Type	Acoustic-Electric
Cutaway	Venetian
Number of Frets	20
Tuners	Die-Cast Chrome
Bridge Wood	Ebony
Strings	Elixir Phosphor Bronze Light
Finish	Varnish
Electronics	Expression System 2 (ES2)
Fretboard Inlays	4mm Dots