Taylor 150 - Models 162 and 168 Accessories

15
Models 150, 152, 162, 168
Controls and Systems
Setting Temperature
When the freezer is properly primed with fresh mix,
place the control switch in the “AUTO” position.
During the freeze-down cycle, monitor the product
appearance and temperature by drawing samples.
Remove the temperature control knob. When the
desired product temperature is attained, slowly turn
the temperature adjustment screw counterclockwise
(warmer)untiltherefrigerationsystemcyclesoff.Draw
additional samples after , and adjust if necessary.
Replace the temperature control knob with the
indicator mark pointing away from the freezer , to allow
for a 2_ adjustment warmer or colder.
Never adjust the temperature control without checking
the product temperature with an accurate
thermometer .Random temperature adjustments often
result in freeze-up conditions, overload conditions,
and severe wear on components in the freezing
cylinder.