Taylor c713 - Page 26

C713 Operator TrainingC713 Operator Training
24
C713 Operator TrainingC713 Operator Training
Troubleshooting: Hopper
The mix in the hopper is too cold.
Cause: The hopper temperature is out of
adjustment.
Remedy: Call an authorized service
technician.
The mix in the hopper is too warm.
Cause: Hopper cover is not in position.
Remedy: Clean and sanitize hopper cover
and place in position.
Cause: The hopper temperature is out of
adjustment.
Remedy: Call an authorized service
technician.
Mix Low and Mix Out probes are not
functioning.
Cause: Milkstone build-up in the hopper.
Remedy: Clean hoppers thoroughly.