Excessive mix leakage into the rear drip pan
Cause: The seal on the drive shaft is
improperly lubricated or worn.
Remedy: Lubricate properly or replace the
seal.
Cause: The drive shaft seal is installed
inside-out.
Remedy: Install correctly.
Cause: Inadequate lubrication of the drive
shaft.
Remedy: Lubricate properly.
Cause: The drive shaft and beater assembly
work forward.
Remedy: Call an authorized service
technician.
Cause: Worn rear shell bearing.
Remedy: Call an authorized service
To Next Page
Loading...
