Taylor Horizon 8752 - Page 49

Section 9
9-1
Models 8752 and 8756 with Horizon® Pump
Parts Replacement Schedule
9
Parts Replacement Schedule
Table 9-1
* Double quantity for Model 8756.
** Triple quantity for Model 8756.
Part Description Every 3 Months
Every 4
Months
Every 6 Months Every 6 Months Annually
Scraper Blades X 2*
Driveshaft Seal X 1*
Freezer Door Gasket X 1*
Front Bearing X 1*
Beater Shoes X 2*
Draw Valve O-ring X 2**
Prime Plug O-ring X 2*
Pivot Pin O-ring X 1*
Design Cap X 1**
Horizon
®
Pump Tube
X
White Bristle Brush, 
9/16 in. x 44 in.
Inspect and replace
if necessary.
Minimum 1
White Bristle Brush, 
1 in. x 2 in.
Inspect and replace
if necessary.
Minimum 1
White Bristle Brush, 
3 in. x 7 in.
Inspect and replace
if necessary.
Minimum 1
White Bristle Brush, 
3 in. x 1/2 in.
Inspect and replace
if necessary.
Minimum 1
Small White Bristle Brush Inspect and replace
if necessary.
Minimum 1
Double-Ended Brush Inspect and replace
if necessary.
Minimum 1
Black Bristle Brush, 
1 in. x 2 in.
Inspect and replace
if necessary.
Minimum 1