Need help?Do you have a question about the TB Wood's Sure-Grip and is the answer not in the manual?
User responsibility to properly guard rotating equipment per OSHA and applicable regulations.
Prohibits use on primary aircraft drives or critical human-life-endangering applications.
Essential to install idler assembly close to mounting structure to prevent premature failure.
Provides a link for cancer warnings as required by California Proposition 65.
Crucial instruction to not use any lubricants during the installation process.
Details the process of tightening cap screws evenly to specified torque values.
Specifies tightening the outer nut using a torque wrench to listed values.
Ensures idler assembly is parallel with drive shafts using a four-point method.
Instructions for loosening cap screws and separating the bushing from the hub.
Lists available replacement bearings for various bushing sizes.
To Next Page
General