Need help?Do you have a question about the TC Electronic BH250 and is the answer not in the manual?
General| Material | Aluminum |
|---|---|
| Product type | Preamplifier |
| Product color | Black, Red |
| LED indicators | Yes |
| Built-in display | No |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| 3.5 mm (1/8-inch) in | - |
| Headphone connectivity | 3.5 mm |
| 6.35 mm (1⁄4-inch) input | 1 |
Weight and Dimensions| Depth | 231 mm |
|---|---|
| Width | 220 mm |
| Height | 63 mm |
| Weight | 1800 g |
Connect an active or passive bass to this 1/4" input jack.
Select position based on bass pickup type (Active/Passive).
Controls intelligently address frequencies for tone shaping.
Effect module for Chorus, Flanger, Vibrato, Drive, Compressor.
Indicates when the TonePrint effect is active.
Controls the amount of the TonePrint effect.
Built-in tuner for 4, 5, or 6 string basses.
Silently mutes all outputs for tuning.
Controls the overall output level and headphone volume.
Power input and switch for 100-240 VAC.
Connect speaker cabinets using Speakon connectors.
Connects to TC Electronic SWITCH 3 for effect control.
Connects to computer for TonePrint upload and software updates.
Stereo auxiliary input for practice tracks or metronome.
Headphone output with playback of AUX IN signal.
XLR output for PA or recording devices, with PRE/POST EQ switch.
Ensure proper airflow to prevent overheating.
Intelligent system to prevent damage under extreme conditions.
Steps to recover from protection mode and seek service.
To Next Page
