Need help?Do you have a question about the TC Electronic Desktop Konnekt 6 and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Channels | 6 |
| A/D Resolution | 24-bit |
| Sampling Rate | 96 kHz |
| Computer Connectivity | FireWire |
| Phantom Power | Yes |
| Headphone Output | 1 x 1/4" TRS |
| Analog Inputs | 2 x 1/4" TRS |
| Analog Outputs | 2 x 1/4" TRS |
| Digital Inputs | S/PDIF (RCA) |
| Digital Outputs | S/PDIF (RCA) |
Describes risks of fire, electrical shock, and proper grounding practices for the apparatus.
Warns users against making modifications not expressly approved in the manual.
States that there are no user-serviceable parts and all servicing must be done by qualified personnel.
Details compliance with FCC rules for digital devices and measures to mitigate radio frequency interference.
Declaration of product compliance with relevant safety and EMC standards.
Details the high-quality mic preamps and instrument inputs for studio-quality recordings.
Introduces the included studio reverb effect powered by AlgoFlex technology.
Lists the main features of the Desktop Konnekt 6 hardware.
Specifies hardware and operating system requirements for Mac and Windows.
Guides users through the process of installing the necessary software.
Explains how to set input levels using gain controls and meters for optimal signal.
Describes the knob controlling the M40 Studio Reverb return level and activation.
Explains controlling the monitor mix between device inputs and DAW signal.
Explains switching signal metering stages: Input, Pre, and Post.
Explains the main volume control for monitor outputs and its LED indication.
Details the line/Hi-Z and microphone input connectors and their features.
Details how to activate phantom power for condenser microphones.
Details the A/B compare function for evaluating different settings.
Details the characteristics of the Hall, Room, and Plate reverb algorithms.
Details the dry/wet mix control for the reverb effect.
Explains the 100% wet mix setting for send effects and cue reverb.
Explains how to link headphone level control to the main volume knob.
Describes how to completely disable the M40 Studio Reverb function.
Explains sending reverb to main outputs and/or headphone outputs.
Sets the sync source for standalone operation mode.
Lists available sample rate options for standalone operation.
Sets the buffer size for ASIO drivers to manage latency.
Configuration options for system clock master and sync source.
Details buffer size settings for PC and Mac audio applications.
Lists the available sample rate options for the device.
Explains how to select the clock master in a digital setup.
Explains lock status indications for external sync.
Determines which input the clock master syncs to.
Instructions for updating software and firmware for the device.
Procedure for updating the device's firmware via the 'About' page.
To Next Page
