TELEPORT GLT/GLR
High-Performance Active Guitar Signal Transmitter/
Receiver for Long Cable Run Systems
Connection
Getting Started
1. Connect the included power adaptor to the GLT power socket.
2. Connect your guitar to the GLT ¼" input via standard instrument cable.
3. Connect a balanced XLR cable from the GLT output to the GLR input.
4. With the ampli er turned o or in standby mode, connect a standard instrument cable from the GLR output to your amp’s input.
5. Power on your ampli er.
6. Move the ground switch on the GLR to the LIFT position if grounding noise is audible.
7. Adjust the DRAG control to simulate the loading that occurs when you connect directly into an amp at close distance. More drag will simulate a longer cable.
GLT
Guitar
GLR
XLR female
XLR male
Guitar amp
To Next Page
Need help?
General
