Need help?Do you have a question about the TC Electronicectronic Mimiq doubler and is the answer not in the manual?
General| Technology | Analog |
|---|---|
| Power Supply | 9V DC |
| Current Draw | 100 mA |
| Bypass | True Bypass |
| Type | Doubler |
| Controls | Effect Level, Tightness |
| Inputs | 1 x 1/4" |
| Outputs | 2 x 1/4" |
| Power Source | 9V Battery |
Lists the items included in the TC ELECTRONIC effect pedal box, advising inspection for transit damage.
Explains the pedal's True Bypass feature and its benefit of zero tone coloration when off.
Details connecting the 9V power supply, instrument, and amplifier to the pedal.
Describes how to turn the effect on/off using the footswitch and the indicator LED.
Explains the standard 1/4" jacks for connecting instruments and outputs.
Details the DUBS, TIGHTNESS, EFFECT, and DRY knobs and their functions.
Discusses optimal placement of the Mimiq pedal in various signal chains and scenarios.
Provides guidance on tweaking controls like layers, tightness, and mix for desired results.
Explains the difference between True Bypass and Buffered Bypass and when to use each.
Details the procedure for changing the pedal's bypass mode using internal dip-switches.
Guides users through downloading and installing firmware updates via a computer.
Provides instructions on how to replace the pedal's internal battery.
To Next Page