Teac EU-48 - TDA2614;TDA2615;TDA2616 Q; General Description of TDA2614; General Description of TDA2615; General Description of TDA2616 Q

11
10. Switch input select control : Audio switching voltage to activate pin7 : Min :0V, Max :0.8V
Audio switching voltage to activate pin9 : Min:1.5V, Max :Vp
11. Supply voltage : 12V, Min:10.8V, Max:13.2V
12. Mute control : For Mute-ON Min : 0V, Max : 0.8V For Mute-OFF Min : 1.5V, Max : Vp
13. Ground
14. Supply voltage : 5V, Min : 4.5V, Max : 8.8V
15. Not connected
16. Sound IF differential input signal : Look at pin 1
TDA2614/TDA2615/TDA2616Q:
General Description of TDA2614:
The TDA2614 is a power amplifier in a 9-lead single-in-line (SIL9) plastic medium power package. It has been especially
designed for mains fed applications.
Features:
n Requires very few external components
n No switch-on/switch-off clicks
n Input mute during switch-on and switch-off
n Low offset voltage between output and ground
n Hi-fi in accordance with IEC 268 and DIN 45500
n Short-circuit proof and thermal protected
n Mute possibility
PINNING PIN VALUE
1. Not connected
2. Mute input : 300mA (For mute to activate)
3. Ground
4. Not connected
5. Supply voltage (negative) : -12VDC
6. Output : 6.9Vrms
7. Supply voltage (positive) : +12VDC
8. Inverting input (Ground) : 0V
9. Non-inverting input : 700mVrms, Min : 500mVrms, Max : 900mVrms
General Description of
TDA2615:
The TDA2615 is a dual power amplifier in a 9-lead single-in-line (SIL9). It has been especially designed for mains fed applications.
Features:
n Requires very few external components
n No switch-on/switch-off clicks
n Input mute during switch-on and switch-off
n Low offset voltage between output and ground
n Excellent gain balance of both amplifiers
n Hi-fi in accordance with IEC 268 and DIN 45500
n Short-circuit proof and thermal protected
n Mute possibility
PINNING PIN VALUE
1. Non-inverting input 1 : 700mVrms, Min :500mVrms, Max : 900mVrms
2. Mute input : 300mA (For mute to activate)
3. Ground
4. Output 1 : 6.9Vrms
5. Supply voltage (negative) : -12VDC
6. Output 2 : 6.9Vrms
7. Supply voltage (positive) : +12VDC
8. Inverting inputs 1 and 2 (Ground) : 0V
9. Non-inverting input 2 : 700mVrms, Min : 500mVrms, Max : 900mVrms
General Description of
TDA2616Q:
The TDA2616Q is a dual power amplifier. It is supplied in a 9-lead SIL-bent-to DIL plastic power package (SOT157).
It has been especially designed for mains fed applications.
Features:
n Requires very few external components
n No switch-on/switch-off clicks
n Input mute during switch-on and switch-off
n Low offset voltage between output and ground
n Excellent gain balance of both amplifiers
n Hi-fi in accordance with IEC 268 and DIN 45500
n Short-circuit proof and thermal protected
n Mute possibility
All manuals and user guides at all-guides.com