Team Kalorik TKG ACM 1010 User Manual (English)

Questions and Answers:

S
Shawn LeeAug 5, 2025
Why is my Team Kalorik TKG ACM 1010 Air Conditioner cooling or heating poorly?
- R
  rebecca90Aug 6, 2025
  If your Team Kalorik Air Conditioner isn't cooling or heating effectively, it might be due to several reasons. Check if there's direct sunlight entering the room and pull the curtain. Ensure that doors and windows are closed, especially if there are many people present or other heat sources are active in cooling mode. Also, inspect the filter screen for dirt and clean or replace it if necessary. Finally, make sure that the air inlet and outlet are free from any obstructions.
M
Mary EstradaAug 10, 2025
What to do if my Team Kalorik Air Conditioner does not work?
- L
  lloydmichaelAug 10, 2025
  If your Team Kalorik Air Conditioner is not working, first, ensure it is properly connected to a socket with electricity. If the overflow indicator displays "FL", discharge the water inside. The unit should be used in an ambient temperature between 7-35oC (44-95oF). In cooling mode, the room temperature should not be lower than the set temperature; in heating mode, the room temperature should not be higher than the set temperature, so adjust the set temperature accordingly. Lastly, in dehumidification mode, ensure the room temperature is greater than 17oC (62oF).
R
Rebecca PearsonAug 16, 2025
How to fix a Team Kalorik Air Conditioner when the compressor doesn't work?
- M
  Michael BurkeAug 16, 2025
  If your Team Kalorik Air Conditioner's compressor isn't working, it might be due to overheat protection being activated. Wait for 3 minutes to allow the temperature to lower, and then restart the machine.