To Next PageTo Next PageWhat to do if my Team Kalorik Heater has no power?
If your Team Kalorik Heater isn't powering on, the power cord may be disconnected, the socket connection might be failing, or the power switch might not be turned on. Ensure the power cord is securely connected, check the socket connection, and verify that the power switch on the back of the appliance is in the 'on' position.
Why is my Team Kalorik Heater making strong vibrations and noise?
Strong vibrations and noise from your Team Kalorik Heater can occur if the fan is not placed on a flat surface or if the fan is damaged. Ensure the heater is placed on a flat surface, and you might consider placing an anti-vibration mat underneath it. If the issue persists, this might indicate damage and you should contact the after-sale service.
General| Brand | Team Kalorik |
|---|---|
| Model | TKG FH 2000 |
| Category | Heater |
| Language | English |
Used to turn the bladeless fan ON and OFF.
Press to turn the Swing function on and off. Horizontal airflow moves side to side.
Press to cycle through Fan, Low Heating, and High Heating modes.
Press repeatedly to increase running time in 1-hour intervals (1-12 hours).
Press to cycle through ambient light options: Off, White, Green, Purple, or Blue.
Press repeatedly to set desired temperature (15-40°C). Selected temperature flashes for 3 seconds.
Instructions for replacing the lithium button cell battery (CR2025) in the remote control.
