Need help?Do you have a question about the Team Orion advantage iq605 and is the answer not in the manual?
General| Charge Current | 0.1-5.0A |
|---|---|
| Discharge Current | 0.1-1.0A |
| Display | LCD |
| Balance Connector Type | JST-XH |
| Power | 50W |
| Cooling | Fan |
| Weight | 350g |
| Input Voltage | 100-240V AC |
| Battery Types | LiPo, LiFe, NiMH, NiCd, Pb |
| Number of Cells | 1-6S (LiPo/LiFe/Li-ion), 1-15 (NiMH/NiCd), 2-12V (Pb) |
Lists key features of the charger, including power supply, cell compatibility, balancer, and safety systems.
Identifies the keypad and the blue backlit LCD screen for user interaction and information display.
Details the 100-240VAC power input, 12VDC power input, and temperature probe/USB connector.
Details the output connector and JST-XH balancing connector on the right side of the charger.
Explains the two power input options: 11-18VDC and 100-240VAC, with a warning.
Explains how to connect battery leads and the balancing connector, emphasizing correct polarity.
Details selecting LiPo battery type and available charging modes like CHARGE, BALANCE, FAST CHG, STORAGE, DISCHARGE.
Explains how to adjust charge/discharge current and cell count for lithium batteries.
Describes how to initiate a charge/discharge cycle, including confirmation of cell count and display information.
Details selecting NiCd/NiMH battery type and available modes like CHARGE, DISCHARGE, CYCLE.
Explains how to adjust charge current for NiCd/NiMH batteries.
Describes initiating charge/discharge/cycling for NiCd/NiMH, including display details.
Lists available modes for lead-acid batteries: Normal charge and Discharge.
Explains how to adjust charge/discharge current and cell count for lead-acid batteries.
Displays NiMH/NiCd sensitivity, Lithium end voltage, and individual cell voltages.
Explains how to access and change default settings like battery type and voltage.
Covers setting lithium battery type and tuning auto-detection for cell count.
Adjusts NiMH/NiCd delta-peak sensitivity and configures USB/temperature monitoring.
Configures cycle delay, safety timer, and capacity cut-off for enhanced safety.
Explains saving and recalling charger settings for multiple batteries.
Explains how to select and load previously saved charger settings.
Addresses polarity reversal, connection breaks, and short circuit errors.
Covers input voltage, charger failure, low/high battery/cell voltage errors.
Addresses overheating and general control failure errors.
Lists actions and conditions that void the warranty or are considered improper product use.
To Next Page
