55OWNER’S MANUAL
• To centre the brake arms, loosen the
cable carrier nut, slide the cable carrier
up or down until it centres the brake
blocks (so there is an even gap on either
side of the rim).
• Retighten the cable carrier nut.
• Spin the wheel to ensure the brake
blocks, do not rub on the wheel rim.
• Use the springforce adjustment screw to
change toe in/out position.
• Using an Allen key turn CLOCKWISE to
move the brake pad trailing edge out.
Turn the Allen key ANTI- CLOCKWISE to
move the brake pad trailing edge in.
To Next Page
Loading...
