46 OWNER’S MANUAL
Side pull brakes
Release the Brake Quick Release. (This will allow
the brakes to be opened to let the tyre pass
between the brake blocks).
Move the Wheel Quick Release Lever to the open
position.
If your bicycle is tted with secondary retention
devices unwind the Quick Release Lever enough
to allow the wheel to be removed.
If your front wheel is tted with axle nuts instead
of a Quick Release mechanism, use a spanner of
the correct size to t the axle nuts.
• Unwind the axle nut sufciently to allow the
secondary retention devices to release.
• Hold the front of the bicycle 30mm to 50mm
off the ground to allow the wheel to be
removed.
To Next Page
Loading...
