80 OWNER’S MANUAL
• Do not paint the frame.
• Avoid scratches and direct impacts to the
frame. If you are involved in a mishap,
or your bicycle is scratched during use,
immediately see your bicycle retailer for
inspection of the damage.
• Use a chain protector to lessen the chance
of chipping the carbon bre tubing.
• Use the manufacturer’s recommended size
seatpost and headset. Do not attempt to
alter the original sizes of these parts.
• Avoid overtightening of the seatpost.
• Any other questions? Please contact your
bicycle retailer.
5.3 TOOLS AND BICYCLE ASSEMBLY
Should you intend to undertake maintenance the
following tools are considered to be the basic
requirement:
• Adjustable wrench 5-10cm
• Adjustable wrench 32cm
• Flat screw driver 15mm
• Phillips head screw driver 15mm
• Allen Key set 2mm-6mm
• Set of open end spanners 7-17mm
• Set of tyre levers
• Chain link remover
• Wire cutters
• Torque wrench
To Next Page
Loading...
