TEC DG-1000 - Page 9

9
Auto-Off Adjustable from 10 minutes to 2 hours
Dimensions 7.0 x 4.2 x 1.4 inches
Weight 15.7 oz
Calibration Meets ASTM Standard E779-03, E1554-07, CGSB-
149.10-M86, EN 13829, ATTMA Technical Standard 1
and NFPA 2001, RESNET and US ACE
Recommended calibration interval Four years
Specications subject to change without notice.
Minneapolis Blower Door
™
and TECTITE
™
are trademarks of The Energy Conservatory. Duct Blaster
®
and TrueFlow
®
are registered
trademarks of The Energy Conservatory.
Stylized images of the Blower Door is also a Registered Trademark.
1
Typical Conditions are a temperature range of 54° to 90° F, and a two year calibration interval.
2
As Calibrated Accuracy is +/- (0.4% of reading + 0.045 Pa) under controlled conditions of 67° to 77° F, four
month calibration interval, and pressure readings averaged for ve seconds. All gauges are veried to meet
this specication at all calibration pressures.
DG-1000 specifications continued
COMPONENT SPECIFICATIONS