Manual
Connections:
Phono (MM) Input:
Use a 2 RCA cable to connect the turntable output with the Phono Input on the rear of
TC-754.
Connect the chassis ground wire from the turntable to the Ground terminal on the TC-
754.
Aux 1-3 (Line) Inputs:
Use a RCA cable to connect the outputs of your line-level device to the appropriate
input on the TC-754. Typical line devices are CD/DVD players, TV audio, or Tape
decks.
You can connect almost any type of device to the TC-754. For instance, you can
connect the audio output of a DVD players or simple microphone mixer to any of the
TC-754 Aux inputs.
To Next Page
Loading...
General