Tech Controllers ST-979

TECH
6
*Parameters available only when Standard operation algorithm is selected.
**Parameters available only when Modulation operation algorithm is selected.
Main menu
Fire-up / Damping
Fuel tank full
Temperature settings
Pre-set CH temperature
CH boiler hysteresis
Pre-set DHW temperature
DHW hysteresis
Pump switch on temperature
Operation settings*
Operation algorithm
Feeding pause
Blow force
Operation in sustain
Pause in sustain
Fan in sustain
Modulation settings**
Operation algorithm
Modulation 30%
Modulation 60%
Modulation100%
Manual mode
Igniter
Blow
Blow force
Feeder
Internal feeder
Grate
Ash remover
Cleaning
CH pump
DHW pump
Additional pump 1
Additional pump 2
Built-in valve 1
Built-in valve 2
Weekly control
CH boiler operation schedule
CH boiler weekly control
DHW weekly control
Operation modes
House heating
Water tank priority
Parallel pumps
Summer mode
Undefloor heating
Buffer parameters
Disinfection
Burning without feeder
Screen settings
Screen view
Screen brightness
Screen damping
Damping time
Software update
Fitter’s menu
Service menu
Language
Factory settings
Software version