TZM-02 User Manual
Setting Aperture Value
1. After switching lenses, turn on the camera.
2. Set the aperture on the camera body to the corresponding aperture (listed above) for the
desired focal length (e.g. F3.2 for a 24mm lens).
3. Release the shutter/take a picture.
4. Check the EXIF data.
5. Set the aperture on the lens to the desired working aperture.
Firmware Upgrade
1. Download the firmware upgrade software on https://techartpro.com/?page_id=5023
2. Check the camera body to make sure the power is over 50%.
3. Connect USB cable to the USB dock on the back cap while mounting on the adapter.
4. Open the software; select the firmware version on the list.
5. Click the “Update” button.
To Previous Page
Loading...