Need help?Do you have a question about the Techly ICA-TR10 and is the answer not in the manual?
General| Brand | Techly |
|---|---|
| Model | ICA-TR10 |
| Category | Racks & Stands |
| Language | English |
Open carton carefully, remove contents, lay out on protective surface to avoid damage.
Verify contents against parts list to ensure all components are present and undamaged.
Read all instructions carefully before proceeding with installation.
Retain this user manual for future reference and consultations.
Read instructions before installation and follow all contained recommendations. Use safety equipment.
Contact a qualified installer if you don't understand directions or have safety doubts.
Do not use the product for purposes or configurations not specified in these instructions.
Ensure the installation procedure was correctly followed at the end of the process.
Periodically check that the bracket is secure and safe for use, at least every three months.
Exercise caution during assembly. Improper installation may cause falls, injury, or damage. Respect weight limits.
Open packaging carefully, remove contents, and lay out on protective material to avoid damage.
Check carton contents against the parts list to ensure all components are present and undamaged.
Read the instructions in this manual carefully before performing the installation.
Keep the manual for future consultation and reference.
Install and use this product with care. Follow all instructions and use adequate safety devices.
Contact qualified personnel for installation if you have doubts or do not understand instructions.
Do not use the product for unspecified purposes or configurations. We disclaim liability for errors.
At the end of assembly, ensure all operations were performed correctly and professionally.
Check that the supports are secure and safe to use at regular intervals (at least every three months).
Be very careful during assembly. Improper installation may cause falls, injury, or damage. Respect the maximum weight limit.
Assemble the base pole with the round base using provided parts.
Extend and adjust the main pole sections as needed for height.
Attach the TV mounting bracket to the top of the assembled pole.
To Next Page
