EasyManuals Logo

Technaxx TX-129 User Manual

Technaxx TX-129
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Air compressor
Plug 12V DC power cord into 12V cigarette lighter socket. Take
the air compressor to the object you need to inflate.
 Remove valve cap and connect the air hose connector to the
valve of the objcet to be inflated.
 Turn on air compressor switch.
 Stop inflation when the desired pressure has been
reached.
Note
Recommended tire inflation pressure for the vehicle can typically
be found on a sticker in the driver’s door frame.
Under normal use the car battery should be able to inflate 4 tires
up to 2.4bar/35PSI easily when the engine is off. If the battery is not
reliable or in use for 2 or more years, we suggest to start engine to
keep battery in good power condition.
Caution
Do not over inflate tires as tires may rupture and/or explode
causing serious injury and/or property damage.
Maximum continuous work time is 10 minutes. Than stop working
for 10 minutes before next inflation.
Attention
Tire inflation should only be done in a safe area, well off roadway
and away from traffic.
Use reflective warning triangles and/or safety flares to alert other
drivers of roadside emergency.
Info
Inflation speed: less than 5 minutes (measured Ø time to inflate a
195 tire from 0 bar/PSI to 2.4 bar/35PSI)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technaxx TX-129 and is the answer not in the manual?

Technaxx TX-129 Specifications

General IconGeneral
BrandTechnaxx
ModelTX-129
CategoryAir Compressor
LanguageEnglish