Technaxx TX-141 User Manual

Settings in photo and video mode
Press menu button in photo or video mode to change the settings.
Menu
Function
Photo Resolution
Set the photo resolution to 1M 1280x960 or VGA
640x480
Video Size
Set the video resolution to 960 1280x960 or VGA
640x480
Night vision
sensitivity
Choose the night vision sensitivity
Power Frequency
Set the light source frequency to prevent interference
50Hz or 60Hz
Power Save
Set the time to shut down the device
3min / 5min / 10min / OFF
Date & Time
Set the date and time of device
Date Stamp
Add the date stamp on the photo or video files
Off / Date / Date & Time
Language
Set menu language.
Format
Format your SD card. It will delete all files including
the protected files
Reset All
Restore the setup to factory default
FW Version
User can see the firmware version information.
Playback
1.Turn on the device, press the mode button to switch to playback mode.
2.Press Up/Down button to view photos and video files.
3.Playback the video
- Press the shot button to start playing the video files.
- Press the shot button again to have a pause.
- Press menu button to stop the current video playing.
Press menu button in playback mode, the screen will display the
playback menu. Press Up/Down button to scan lock or delete. And press
shot button to select one to enter the submenu.

Technaxx TX-141 Specifications

General

Brand	Technaxx
Model	TX-141
Category	Camcorder
Language	English