techni vorm MOCCAMASTER KM5 - ADJUSTING YOUR GRIND SETTINGS; Getting started

4
Nederlands
DeutschFrançais
Español
Italiano
English
9
8
7
6
5
4
3
2
1
STEP 4.
Pour ground coffee from the grounds
container directly into your prepared
brew basket or coffee brewer, or
measure your grounds rst.
STEP 3.
Remove the grounds container from
underneath the dispensing spout and
remove the lid.
adjusting your grind settings
STEP 1.
Activate the grinder by holding
the power switch (D).
STEP 2.
With the grinder running, adjust
the grind setting by rotating the
adjustment knob (J) clockwise or
counterclockwise.
Turning the knob clockwise will
produce a ner grind.
Turning the knob counterclockwise will
produce a coarser grind.
For rst use, set the adjustment knob to 5. On subsequent use, always activate the
power switch before adjusting the grind setting. This allows the burrs to clear any
partially ground beans that may be present from previous use. If bean remnants are
trapped in the burrs, adjusting the grind setting without activating the grinder may
cause the motor to jam.
Getting started