There are also SD Card and USB flash drive inputs
on the front panel of the
hybrid
which is compatible with iPod™
(Classic and Nano) via the USB input.
The maximum size of the SD Card or USB flash drive is 32GB. If your
memory card exceeds 32GB, the unit will not be able to read the files from the memory cards. You will only be able
to play
.mp3, .wav, .wma
files directly from these memory cards once they are inserted into the front panel of the unit.
Press the play/pause button on the front panel of the unit to begin playing files from your USB /SD Card, press this
button again to pause. Press the NEXT button to move to the next track on either the USB,SD Card or
iPod™(Classic
and Nano)
. Press the PREVIOUS button to move to the previous track on either the USB,SD Card or
iPod™ (Classic
and Nano)
.
NOTE: THE USB INPUT WILL ONLY CONNECT TO A USB FLASH DRIVE OR iPod™(Classic and Nano). DO NOT
ATTEMPT TO CONNECT THE USB INPUT DIRECTLY TO A COMPUTER AS THIS WILL NOT WORK.BE SURE NOT
TO HOOK-UP AN AMPLIFIER OR ANY AMPLIFIED SIGNAL INTO THE RCA INPUT JACK AS THIS COULD DAMAGE
THE
HYBRID
. NO OTHER AMPLIFIER IS NEEDED TO POWER YOUR SIGNAL IN ADDITION TO THE
HYBRID
.
ALWAYS MAKE SURE THAT THERE IS ONLY ONE AMPLIFIER IN THE SIGNAL PATH.
NOTE: ONLY VOLUME +/-. PREVIOUS/NEXT TRACK & PLAY/PAUSE FUNCTION WORK FOR BLUETOOTH. THE
OPERATIONS OF THE BLUETOOTH CONNECTION MAY VARY AS DIFFERENT BLUETOOTH DEVICE. THIS MANUAL IS
BASED ON THE CONNECTION TO AN iPhone™ AND ARE ONLY CORRECT FOR THE UNITS WHICH HAVE BLUETOOTH
CAPABILITY.
Turn on the unit and the bluetooth function on iPhone™,then search for the device named “TPRO+MODEL” and pair the
devices.The pair code is “0000”--- 4 zeros.Connect after successfully pairing.The indicator on the front panel of the unit
will be on after iPhone™ successfully connected to the unit. You can play the tracks from iPhone™ and press the
previous, next or pause button on either the front panel of the unit, the remote control or iPhone™ to control the playing.
When iPhone™ is taken away for a long distance from the hybrids until it disconnects, or when the bluetooth function of
iPhone™ is disabled, the hybrid will still be occupied by this iPhone™ unless the “Play/Pause” button on the face or the
“Play/Pause” key on the remote is pressed to release the hybrids to other blueooth devices.
There are two ¼" inputs on the face of the unit which you can plug microphones directly into. It is important to
note that these inputs are to be used solely by microphones. Do not attempt to use the ¼" inputs for any other
use. To use, simply plug the microphones into the ¼" inputs while the speaker and microphones are in the OFF
position. Once plugged in, power on the unit and microphones. Once turned on, simply turn up the Microphone
Volume and the Master Volume.
Note: IF YOU HAVE TWO MICROPHONES PLUGGED INTO THE HYBRID THEN THE ECHO,BASS AND
TREBLE CONTROLS WILL ADJUST THE SOUND ON BOTH OF THE MICROPHONES.
The two microphone inputs have many options which can be controlled on the front panel of the unit. The
microphone volume control can be found on the front panel of the unit. Use this control to adjust the volume of the
microphones.There are also three microphone sound controls on the front panel of the unit, an echo control,a bass
control and a treble control. Use these controls to adjust the sound from the microphones.
Microphone Controls
Connecting Two Microphones to Hybrid
Connecting a device with Bluetooth (for example an iPhone™) to Hybrid via Bluetooth
Volume and Tone Controls
The volume control on the face of the unit controls the volume at which the signal is played at. Turn the volume
control clockwise to increase the volume and counter-clockwise to decrease the volume.
Hybrid Series
USB Flash Drive & SD Card & iPod
™(Classic and Nano)
& Bluetooth Connection
MP3 Player
To Next Page
Loading...
Need help?
General
