Technics SA-C600

14
Network settings (Continued)
(14)
Setting the network from the setup
menu
1 Press [>SELECT<] to select
“Chromecast built-in”.
2 Press [SETUP].
3 Press [
], [ ] repeatedly to select
“Network” and then press [OK].
• When “Wi-Fi Menu” screen is displayed,
press [OK].
4 Press [ ], [ ] to select “On” and
then press [OK]. (The wireless LAN
function is enabled.)
5 Press [
], [ ] to select “Wi-Fi Setup”
and then press [OK].
• “Setting” is displayed.
6 Open the Google Home app and
follow the on-screen instructions.
(As follows)
■
Using the Google Home app
“Wi-Fi Setup”
When using the Chromecast-enabled apps to
play music on this unit, you need to set up a
network connection using Google Home app.
1 Open the Google Home app and
follow the on-screen instructions to
set up a connection.
• When the connection is established,
“Success” is displayed.
- “Fail” may be displayed if the connection
was not complete. Try this method again
from the setup menu. If “Fail” is still
displayed, try other methods.
2 Press [OK] to exit the setting.
Note
• This unit will be displayed as “Technics-
SA-C600-
****
” if the device name is not set.
(“
****
” stands for characters unique to each
set.)
• You can check your network information (SSID,
MAC address and IP address) from the Google
Home app or “Technics Audio Center” app.
• Some items on the Google Home app are
irrelevant to this unit.
• For using stream audio via AirPlay, you can set
up a network connection using Apple Home
app.