EasyManua.ls Logo

Technics SB-S500

Technics SB-S500
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
POLSKI
C
ˇ
ESKY
B
Installation on a wall
Fit the front and surround speakers following the method below.
The illustration above shows how to fit the surround speakers. The
same method also applies to the front speakers.
Ensure the wall is strong enough to support the speakers. There is
a danger of speakers falling if it isnt. Consult with your Technics
dealer before installation.
1 Attach the metal wall mount (included).
2 Attach the speaker feet (included).
Attach two to the lower part of the rear of the speaker.
3 Install the speakers on the wall.
Screw the wood screw (not included) into a thick, hard part of
the wall.
Attaching the speaker feet
Attach four speaker feet to the base of each speaker that is to be
put directly on the floor or a shelf.
The above illustration shows an example using the center speaker.
The method is the same for the other speakers.
To prevent damage to the speakers, lay them on top of a soft
cloth before attaching the speaker feet.
The front speakers are extremely slim, so take care they do not
topple.
Note
SB-S500SB-C500SB-LV500
B
Note
SB-S500SB-LV500
A
Installation on a wall
Fit the front and surround speakers following the method below.
The illustration above shows how to fit the surround speakers. The
same method also applies to the front speakers.
Ensure the wall is strong enough to support the speakers. There is
a danger of speakers falling if it isnt. Consult with your Technics
dealer before installation.
1 Attach the metal wall mount (included).
2 Attach the speaker feet (included).
Attach two to the lower part of the rear of the speaker.
3 Install the speakers on the wall.
Screw the wood screw (not included) into a thick, hard part of
the wall.
Attaching the speaker feet
Attach four speaker feet to the base of each speaker that is to be
put directly on the floor or a shelf.
The above illustration shows an example using the center speaker.
The method is the same for the other speakers.
To prevent damage to the speakers, lay them on top of a soft
cloth before attaching the speaker feet.
The front speakers are extremely slim, so take care they do not
topple.
Note
SB-S500SB-C500SB-LV500
B
Note
SB-S500SB-LV500
A
ç Ô˚Ú‡ÈÚÂÒ¸ ÔpÓËÁ‚ÂÒÚË Ì‡ÒÚÂÌÌÛ˛ ÛÒÚ‡ÌÓ‚ÍÛ ‰Ë̇ÏËÍÓ‚
͇ÍËÏÎË·Ó ËÌ˚Ï ÒÔÓÒÓ·ÓÏ, ÍpÓÏ ÓÔËÒ‡ÌÌÓ„Ó ‰‡ÌÌÓÈ
ËÌÒÚpÛ͈ËË.
ÇÌËχÌËÂ

Related product manuals