Technics SD-S948

O
...........'................................................H
666 []
666
cb666
b
%
(Only available from the remote control.) •
I Todirectlyaccessa specificdisc[]
H Press CD.
This will set the remote conta'olto operate the CD changer.
Press DISC.
_1 [Within7 seconds]
Select the disc you want with the _umeric buttons.
To select a disc from 1 to9
Forexample:"6""
Ug3
To select a disc from 10 to 110
Push the button within 7 seconds each other.
When selecting discs, the >10 button does not respond to
touch.
B [Within 7 seconds] ,
Press F.
The changer will start playing the selected disc from the first
track.
Hjlooooeoe.ol..ooQoo.,olooo,a.olaeoo.H.Qoe.oo,.-e,...tooooee'''''looeee'D'loeeo
For your reference
• If you press DISC ENTER instead of )_ to select a disc, the disc
number will be displayed but play will not start automatically.
• When in the stop mode, if you select an empty slot, the message
"NO DISC" will appear on the display.
• While a disc is playing, if you select an empty slot, the changer
will automatically play the next disc available.
• If you select "0", the changer will switch to the single disc play
mode.
1 Todirectlyaccessa specificfrack []
After selecting a disc, select a track with the numeric buttons.
Press the numeric button(s) to select the track.
To select a track from 1 to 9
For example: "6"
Ug3
To select a two-digit track number 10 or higher
For examvle: "19"
Push the button within 7 seconds each other.
Play will begin from the selected track.