Technics SH-R500

_
To
program
the
multi-function
keys
display
off/on
Switch ON the display.
ENGLISH
Select ‘‘MULTI’’.
(Press two times.)
Press ‘‘enter’’.
“MULTI” will flash.
Select the key you want
to program.
“MULTI”
and
“LEARN”
will
flash.
Select the equipment to
be controlled.
Program the desired
control function.
Repeat this step until all
desired controls are
programmed.
When the control is programmed
correctly, the “OK” sign is
displayed.
When 8 control functions have
been entered, the unit will return
to the “use” mode.
To stop programming
Press the “use” key.
To alter the program
Repeat the above procedures.
(The
previously
programmed
contents
will
be
erased.)
29