Technics SX-KN400

IM—-HO2Zzm
Part ill
Recording and playback
ll. Storing the DRUMS part
1. Press the RECORD button in the COMPOSER
section. “ d r ” appears on the display. The
metronome starts. (If the DRUMS part has not
been cleared, any previously stored DRUMS
rhythm can also be heard.)
RECORD
oO
CO)
2. Play the desired percussive keys on the key-
board in time with the metronome for two
measures.
e Any contents stored in the DRUMS part can
be deleted by pressing the CLEAR button.
e You can distinguish the 1st measure from the
2nd measure by the horizontal lines on the
display.
2nd measure
ist measure
e If you press a percussive key while pressing
the INSTR ERASE button, that instrument will
be deleted for as long as the INSTR ERASE
button is pressed.
¢ Up to four instruments can sound with the same
timing. However, if the MANUAL PERCUS-
SION is played with the COMPOSER during
playback, the number of DRUMS instruments
that sound becomes less.
¢ Adjust the tempo as necessary.
e If either QUANTIZE level is selected during
recording, any unevenness in the timing of the
performance is smoothed out. The default set-
ting is §. (Refer to page 19.)
Store the following example:
Hi-hat closed
ist measure 2nd measure
1@——
Snare drum
ae ee ee ee ee
Bass drum