Technics SX-KN400

To--OzmM
Part ill
Recording and playback
Editing a preset rhythm pattern
The editing feature of the COMPOSER allows you
to modify any of the factory-preset rhythms or
even your original rhythms, and then store the
new patterns in the four COMP buttons.
1. Select the rhythm to be modified with the but-
tons in the RHYTHM SELECT matrix.
2. Press the RECORD button in the COMPOSER
section.
RECORD
oO
C
3. Press one of the COMP 1~4 buttons in which
to store the modified rhythm pattern. The se-
lected rhythm is now recalled. “ A L L ” ap-
pears on the display.
RHYTHM SELECT
comp 1°
COMP 20(_)
COMP 30(_)
COMP 00C )
4. Press the RECORD button 1 to 5 times so that
the indicator for the part you wish to edit is lit.
For example, if you want to modify the BASS
part, press the RECORD button two times.
RECORD
O
C
5. You can clear the part and begin storing it from
the beginning, or you can edit the part without
clearing it.
e Press the CLEAR button ONLY if you wish to
delete all of the pattern for the selected part
and store a new pattern from the beginning.
20
6. If desired, use the RECORD button to select
other parts to modify.
RECORD
oO
c)
7. When you have completed making the modi-
fications, press the RECORD button the num-
ber of times required for the RECORD button
indicator to turn off. The modified version of
the rhythm pattern is now stored in the specifi-
ed COMP button.
RECORD
O
ass,
m Note regarding modification of preset rhy-
thm patterns
Preset rhythms which are stored in the COMP
buttons may have a somewhat different nuance
from the original preset rhythms.