Technics SX-KN550

wn
c
°
sa
©
12
a
a.
©
w
oO
=
Oo
ia*)
_
o.
Part IV
Composer (KN650)
<ACCOMP parts>
1. Press an ACCOMP track button (ACCOMP 1,
2 or 3).
SEQUENCER
RECORD POLY1 POLY 2 BASS iSRORD
[9] 2] ° ° °
STEP RECIACCOMP2 ACCOMP3}DRUMS CONTROL
: : ;
e The indicator for the selected ACCOMP part
flashes.
2. On the SOUND/VARIATION SELECT number
pad, select the desired sound for the ACCOMP
part (00-94).
3. Play the ACCOMP part in time with the other
previously recorded parts.
e Record the performance in C major for correct
chord progressions during playback.
¢ If desired, record the other ACCOMP parts in
the same manner.
To end recording
When you have completed storing all the parts,
press the RECORD button to turn it off.
COMPOSER
CLEAR RECORD
oe
@ To clear the recorded contents
Press the CLEAR button.
COMPO:
SER
CLEAR REGORD
RO
e The memory for the selected ACCOMP part is
cleared.
e Expressed in terms of notes, the total
memory capacity of the COMPOSER is ap-
proximately 1500 notes.
The remaining memory is shown as a per-
centage (%) on the display.
When the memory is full, “Memory full” is
shown on the display and no more data can
be recorded.
e The instrument returns to the normal perform-
ance mode.
e If you wish to create patterns for other rhythm
components (INTRO and FILL IN, for example),
repeat the procedure beginning from “Prepara-
tion” above. In this case, select 99 COM-
POSER in step 1, and select the desired
rhythm component in step 4.
Playing
back
your
stored
rhythm
pattern
Your newly created rhythm pattern can be played
back just like the preset rhythms.
1. On the RHYTHM SELECT number pad, select
99.
2. Press the START/STOP button.
STARWSTOP
¢ The DRUMS part begins to play back.
3. Press either the ONE FINGER or FINGERED
button of the AUTO PLAY CHORD to turn it
on.
4. Specify the chord on the left section of the
keyboard. Oo
v
¢ The BASS and ACCOMP parts are played
back in the specified chords.
48