Technics SX-KN550

n
c
e)
-
i
=
rom
a.
©
0
is)
2
oO
©
he
o
Part Vi
REVERB TYPE & DEPTH
Select the type of DIGITAL REVERB and adjust
the depth of the echo.
1. Select 08 REVERB TYPE & DEPTH.
2. Use the TEMPO buttons to select the type, and
the TRANSPOSE buttons to adjust the depth.
KN550
TEMPO TRANSPOSE
Type
LCD CONTRAST (KN650)
Adjust the brightness of the LCD display so that
it is easy to read.
1. Select 12 LCD CONTRAST.
2. Use the TRANSPOSE buttons to adjust the
setting.
TRANSPOSE
12:LCD CONTRAST LN
e Select a setting from 1-8. The higher the num-
ber, the darker the characters appear.
3. When you have finished making the setting,
press the MODE SET button.
e The instrument returns to the normal perform-
ance mode.
56
Setting the functions
Type
e¢ KN550: Select from 1-8.
e KN650: Select from eight types of reverb:
ROOM 1, 2, HALL 1, 2,3, CATHEDRAL, ECHO
1, 2.
Depth
e Specify a depth from 1-8. The higher the num-
ber, the more pronounced the effect.
3. When you have finished making the setting,
press the MODE SET button.
e The instrument returns to the normal perform-
ance mode.
m= Quick setting
If
the
DIGITAL
REVERB
button
is
pressed
and
held down, the display changes to this display,
allowing
you
to
make
the
setting
immediately.
e The display returns to the normal performance
display a few seconds after you have com-
pleted making the setting.