Technics SX-KN930

ERROR DISPLAY
WRONG The data on the disk that you are using
DISK! is for a different product.
01 | LOAD ERROR | An error has occurred while the disk was
TRY AGAIN! | Joading. Please try again.
There is no disk in the Disk Drive.
The file that you tried to load is empty.
04 | SAVE ERROR | An error has occurred while the data was
TRY AGAIN! | being saved. Please try again.
05 | WRITE The disk that you are using is write
PROTECTED! | protected. Please remove the write
protection and try again.
DISK FULL! The disk that you are using is full. Please
use another disk.
07 | FORMAT An error has occured while the disk was
ERROR formatting. The disk that you are using
TRY AGAIN! | may be faulty. Please ‘try formatting
another disk.
DATA IS COPY! The data on this disk is copy protected.
PROTECTED!
PREY The data on this disk is already copy
PROTECTED! | Protected.
11 |SEQUNCER There is an error in the SEQUENCER
DATA ERROR!) data. Playback is not possible.
42 |MEMORY The memory is full. No more data can be
FULL! recorded.
13 | CHANGE It is not possible to change the time
IMPOSSIBLE! | signature of a COMPOSER paitern after it
has been recorded. If you want to proceed,
you must first clear the entire COMPOSER
pattern.
ONLY AVAIL | model Techincs instrument, set the load
option to “ALL”.
There is no data in the SEQUENCER.
SEQUENCER
DATA!
4 .
SMF An error occurred in the SMF conversion.
“ALL” OPTION | To load data which was saved on an older
CONVERT
ERROR!
Ze
BTL
NOARD
This
disk
is
not
in
the
Standard
MIDI
File
MIDI
FILE!
data
format.
SMF conversion is possible only for files
with a time base (PPQ resolution) of
24/48/96/1 92/288/384.
FORMAT 2,3,4..SMF data cannot be
ERROR! used.
28 | RHYTHM & Step record can be activated only for
CHORD ONLY!) tracks to which the RHYTHM or CHORD
part has been assigned.
29|SELECTA A COMPOSER rhythm cannot be selected
PRESET PTN!'| for the SOUND ARRANGER. Please
select a preset rhythm.
OQ} SELECT A Please select Bank “13 User Memory” to
USER BANK! | store in the MANUAL SEQUENCE PADS.
3
31 | TRACK Special tracks such as CHORD/APC,
ASSIGN , | RHYTHM and CONTROL exist in the song
MISMATCH! | from which you are copying and are
incompatible with the destination song
because it is in the GM mode.
32|MEAS/T.SIG | The COMPOSER paitern you have chosen
MISMATCH! | has a different time signature or number of
measures from the other paiterns in this
COMPOSER CHORD MAP. All of the
COMPOSER patterns used in a
COMPOSER CHORD MAP must have the
same time singnature and number of
measures,
14) TIME SIG
The time signature of the pattern from
MISMATCH!
which you are copying is different from the
COMPOSER memory that you are using.
Either: Change the time signature of the
COMPOSER memory or: Copy from a
pattern that has the same time signature.
15 {TIME SIG The time signature has already been set.
ALREADY SET] |t cannot be changed.
16 | TRACK The specified track already exists. It is
EXISTS! impossible to assign two tracks to that part.
17 | FILE TOO The song is too long to be saved as an
LONG! SMF file. ~
SMF LOAD The SMF file that you tried to load exceeds
ERROR! the memory capacity of this instrument and
cannot be loaded. The destination
SEQUENCER memory has been cleared.
NOT ENOUGH} The song that you have tried to load
AVAIL exceeds the this instrument's available
memory and cannot be loaded. The
selected SEQUENCER song memory has
been cleared. Please clear existing songs
in the instrument’s memory using SONG
CLEAR to make more memory available,
and try again.
34} THIS FILE IS This is an SMF FORMAT 1 file. Direct Play
SMF FORMAT! and Sequncer Medley are not available for
this file.
35 | RHYTHM There is an error in the rhythm data.
DATA ERROR!) Playback is not possible.
MSP DATA There is an error in the MANUAL
ERROR! SEQUENCER PADS daia. Playback is not
possible.
_ ee)
BULK DUMP
SEND ERROR!
An error occurred during system exclusive
transmission. The data was not transmitted
successfully. Please try again.
BULK DUMP
RECV ERROR!
An error occurred during system exclusive
data reception. The data was not received
successfully. Please try again.
is The remaining battery power is very low.
Replace all the batteries with new ones
immediately.
BULK DUMP
ID CODE ERR!
The Identication (ID) code of the system
exclusive data received by this instrument
is for a different product.