Technika A700 - Page 15

CLOCK/CALENDAR SETUP
Press
or to select Clock/Calendar setup. Press OK
Press
or to select Show Photo. Press
Press or to select On or O. Press OK to conrm and return.
The “Show Photo” default setting is O. However, when On is
selected a slide show is visible when the DPF is in Clock/Calendar
display mode - see Page 12.
• Select On in the Show photo menu
• Press MENU to exit Setup and go to the
Main Menu.
• Select Clock (or Calendar)
• Press OK
The clock/calendar will display with a
slide show of photos from the connected
media.
Setting the Time
The Default Time Format is for a 24 hour clock. Before setting the time
you may wish to change the time format to 12 hour (AM/PM).
Press
or to select Set Time Format. Press
Press or to select 12hr /24 hr. Press OK to conrm and return.
Press or to select Set time. Press
Press the
keys to toggle between minutes and the hours.
Press or to change the minutes/hours.
If you have selected the 12 hour clock, AM and PM will be displayed.
Press OK to conrm and return to Clock/Calendar Setup.
Page 15
Show photo Off
Set time On
Set time format
Set date
Set date format
Clock/Calendar Setup
Show photo 12hr
Set time 24hr
Set time format
Set date
Set date format
Clock/Calendar Setup
USB
Main Menu
Card
Clock
23:37:06
20/08/10
Friday
Show photo
Set time
Set time format
Set date
Set date format
Clock/Calendar Setup
(hh:mm)
09 58 AM