Setting the Date
Before you can date stamp your photos or recordings you must set
up the date and time.
• Select DATE INPUT with the MN buttons
• Press OK to confirm
• Select SET with the MN buttons
• Press OK to confirm
To Set the Date and Time
• Select the Date Format with the MN buttons
You can select DD/MM/YYYY, MM/DD/YYYY; YYYY/MM/DD
• Press the OP keys to move to the Date section
• Press MN to set the Day, then press OP to move to the month.
• Set the Month and Year in the same way then press OP to move
to the time. Now set the time in the same way.
• Press OK to exit. The date will now appear in the Capture Menus.
Setting the Time Stamp
• Switch the camera on.
• When the menu screen loads press the MENU button.
• Select Time Stamp with the MN buttons
• Press OK to confirm.
• Select the type of Stamp you need
• Press OK to confirm
• Press the MENU key or O to EXIT
Off
Burst
OK Set
Exit
Capture
Date Input
Time Stamp
Off
Setup
Next Menu
Off
Set
DD / MM/YY
01 / 01 / 2007
00 : 00 : 00
OK: Exit
SET
Burst
OK Set
Exit
Capture
Date Input
Time Stamp
Off
Setup
Next Menu
Off
Date Only
Date and Time
15
To Next Page
Loading...
