Altering the Screen Display
The screen display has three modes
When the camera is switched on the normal mode appears.
Normal Mode displays the image on screen and all the relevant icons
• Press the DISPLAY button once
The icons will clear but the picture subject will remain.
• Press the DISPLAY button once more
The screen will be blanked out but the camera is still operational.
If you press the shutter, the camera will take the picture. After processing, the
shot will briefly be displayed after which time the screen will go blank again.
This mode of operation can be useful
• When you want to preserve battery life
• When you want to leave the camera switched on so that it is ready to take a quick shot
• In very bright sunlight
• Press the DISPLAY button a third time to restore normal mode.
X2
X3
DISP
DISP
DISP
9
00100
25/01/2007
SD
5M
The BUSY light will come on showing the camera is operational
BUSY
To Next Page
Loading...
