INSTALLING THE CAMERA SOFTWARE
The utilities disc supplied with this camera includes:
• The camera driver
• ArcSoft PhotoImpression 5 and VideoImpression 2
Installing the Camera Driver
DO NOT CONNECT THE CAMERA TO THE PC
Load the CD into your CD Drive
The welcome screen will appear
Click "Install Camera Driver"
Follow the prompts.
Let the software install
Press Finish to complete the installation.
If the CD does not auto start:
Go to the START/RUN menu
Type D:autorun
(where D: is the letter of the CD drive)
The welcome screen will now appear
Windows ME/2000/XP: If you do not wish to use the webcam you need not install the camera driver. When you
connect the camera to the PC the SD disk in the camera will appear as a removable drive allowing you to upload
and download images. We recommend you install this software to enjoy the full functionality of your new camera.
If you have Windows 98 installation of the camera driver is necessary.
The camera connects to the PC via the supplied USB2 cable. Images are stored on an SD card. If you have a card
reader you may download images to your PC from the card. You may also plug the card into a suitable printer for
direct printing.
32
To Next Page
Loading...
